IBM A2010-565 問題集

質問 1：
During a deployment, a customer has identified location data that they would like added to both chassis and interface events from active (IBM Tivoli Network Manager IP Edition V3.9 (ITNM)) and passive (traps, syslog etc.) event sources.
This data has been successfully imported into the Discovery process using supported stitching techniques and appears in the topology as three custom Extralnfo fields (see below).
Ncpjnode1 has been configured to transfer this location data to a custom extended NCIM database table named locations (see exhibit below). This data is only held on EntityType 1 (chassis entities) to reduce the NCIM load.
The customer has identified three ObjectServer fields that they would like this data :o be added to for all suitable events-NmosGeography, NmosCountry, and NmosSite

Example record in Model Description of the ncim.locations table

The ModelNcimDb cofiguration has been modified to map:

Based on the scenario, what is the correct stitcher method to populate a record with Extralnfo > m_Geogrpahy location data and then update the NmosGeography ObjectServer field?
Assume that a chassis and locationData Records have been defined and the mainNodeld is set to the Entityld of the chassis of the in scope event.
Example:
Record chassis;
Record locationData.
text geog-'.
chassis = GwEntityData( mainNodeld);
A. [email protected]; @locationData.NmosGeography = geog. GwEnrichEvent( locationData);
B. NmosGeography = eval(text, '&8<Extralnfo->m_Geography'); GwEnrichEvent (NmosGeography);
C. NmosGeogrpahy = @chassis.locations.GEOGRAPHY; @locationData.NmosGeography = eval(text, '$NmosGeography'); GwEnrichEvent (locationData);
D. [email protected]_Geography; @locationData.NmosGeography = geog; GwEnrichEvent(locationData);
正解：A

質問 2：
One feature of IBM Tivoli Network Manager IP Edition V3.9 is the ability to launch context-based Web applications. The network view can be launched with the context. How is this done in the URL?
A. https://host:port/ibm/console/NetworkView.do?id=10690
B. https://host:port/ibm/ncp_topoviz/NetworkView.do?id=10690
C. https://host:ponVibm/console/ncp_topoviz/NetworkView.do?id=10690
D. https://host:port/ibm/console/ncp_topoviz/id=10690
正解：C

質問 3：
Aside from the number of devices being discovered, what is the most important information to gather when determining the number of needed domains?
A. average number of interfaces per device
B. number of active poll definitions and intervals
C. number of users that will use the portal
D. number of pollingengines
正解：A

質問 4：
Which steps add a new node to the ping finder?
A. 1) Navigate to the Seed page within the Network Discovery Configuration pane.
2) In the section for Use File Finder in Discovery, click the icon to add a new seed.
3) Complete the dialog box to add a new file name.
B. 1) Navigate to the Scope pagewithin the Network Discovery Configuration pane.
2) Click the icon to add a new scope.
3) Complete the dialog box to add a new range to the scope.
C. 1) Navigate to the Advanced page within the Network Discovery Configuration pane.
2) In the section for Use Ping Finder in Discovery, click the icon to add a new seed.
3) Complete the dialog box to add a new IP address.
D. 1) Navigate to the Seed page within the Network Discovery Configuration pane.
2) In the section for Use Ping Finder in Discovery, click the icon to add a new seed.
3) Complete the dialog box to add a new IP address.
正解：D

質問 5：
Which step is required to add additional discovery information to the Structure browser in IBM Tivoli Network Manager IP Edition V3.9?
A. It is not possible to add additional information gathered during the discovery to the structure browser as different display fields are all hard coded.
B. There are no modifications necessary All additional discovery information is automatically added.
C. It only needs the appropriate necessary inserts in the DbEntityDetails.cfg file.
D. This requires amodification of the NCIM schema and will require a reinstallation of the NCIM database.
正解：C