IBM C4070-604 問題集

質問 1：
A new customer bought a zEnterprise 114 and zBX. The customer questioned why there are two HMCs configured. Which of the following is the reason that the HMC needs to be redundant?
A. zEnterprise 114 and zBX will have a dedicated HMC respectively
B. All zEnterprise servers are configured with 2 sets of HMC by default
C. The Support Element (SE) is no longer available
D. Two HMCs are required to preserve Ensemble state configuration
正解：D

質問 2：
Which of the following tools provides a financial analysis for a distributed server consolidation on System z opportunity at no cost to the customer?
A. SCON
B. PRA
C. BVWA
D. RACEv
正解：D

質問 3：
A customer is planning an upgrade to a z114. They have indicated that they will be adding additional disk storage in the future and want to make sure they have room for non disruptive future I/O growth. Which of the following is the appropriate first action for the Technical Specialist?
A. Carefully plan out the upgrade based upon the current I/O configuration. Confirm there is enough room to support and add a future I/O drawer if needed.
B. Use the eConfig Plan Ahead feature to place an order for an additional I/O drawer but don order any cards until they need them.
C. The z114 hardware model M10 has more I/O adapters so you should order the M10 model which will assure you have room for future growth.
D. Ask the sales specialist to give the customer a discount and order the cards at the end of the quarter
正解：A

質問 4：
A zEnterprise customer is considering consolidating multiple CPCs. What basic technical factors should be included when performing a CEC consolidation analysis?
A. Ask if SOA is included in Application Development methodology futures.
B. Discuss implications of IPv6 on capacity requirements
C. Integrate all SCP LPAR definitions and CEC weights, then consider possible elimination or integration options.
D. Involve customer application and datacenter managers on their views about personnel relocation.
正解：C

質問 5：
A customer is planning an upgrade to a z196 from a System z9. They still have a high number of ESCON I/O channels on the current machine. The customer has no immediate plans to migrate away from their ESCON attached I/O devices. Which of the following actions should the Technical Specialist suggest?
A. IBM Global Services may conduct a onsolidation Analysis?to help better understand the customer environment.IBM Global Services may conduct a ?onsolidation Analysis?to help better understand the customer environment.
B. The customer should purchase ESCON to FICON convertors for each active ESCON port.
C. ESCON channels are still supported on the System z196, no additional steps are required
D. The customer must verify the number of active ESCON ports required. Fewer than 240 ports may be carried over on the z196. Additional ESCON ports require ESCON to FICON convertors.
正解：D

質問 6：
A System z technical specialist is designing a z196 solution. Which of the following may be selected using eConfig?
A. Select the number and type of I/O cages and I/O drawers
B. Select how much memory to put on each book for multi-book processors.
C. Select the total amount of user memory and the number and type of I/O ports
D. Manually assign the PCHIDs and CHPIDs
正解：C