Nutanix NCSC-Level-1 問題集

試験コード：NCSC-Level-1

試験名称：Nutanix Certified Services Consultant (NCSC): Level 1

最近更新時間：2026-07-02

問題と解答：全80問

NCSC-Level-1 無料でデモをダウンロード：

PDF版 Demo ソフト版 Demo オンライン版 Demo

無料問題集NCSC-Level-1 資格取得

質問 1：
After finishing foundation on an AHV cluster, a consultant is preparing to plug into the customer network given the following set of requirements:
* All network traffic on trunks is tagged
* Customer is using LACP
* A native VLAN is not in use
Which set of commands should the consultant use to ensure cluster connectivity on customer equipment?
A. change_cvm_vlan 0
ovs~vsctl set port br0 tag=0
ovs~vsctl set port br0-up bond_mode=active-backup
B. change_cvm_vlan 10
ovs-vsctl set port br0 tag=10
ovs-vsctl set port br0-up bond_mode=balance-tcp
C. change_cvm_vlan 10
ovs-vsctl set port br0 tag=10
ovs-vsctl set port br0-up bond_mode=balance-slb
D. change_cvm_vlan 0
ovs-vsctl set port br0 tag=0
ovs-vsctl set port br0-up bond_mode=balance-tcp
正解：D

質問 2：
A consultant is viewing an ESXi host via console without external network connectivity.
Which two IP addresses can be used to connect to the CVM (Choose two.)
A. 192.168.5.253
B. 192.168.5.1
C. 192.168.5.254
D. 192.168.5.2
正解：C,D

質問 3：
A consultant has deployed a Nutanix cluster with AOS 5.10.x, then discovers the customer's environment is running on AOS 5.6.x. The consultant decides to re-image the cluster using the foundation Java applet. During the Foundation discovery, all cluster nodes display a status of Unavailable.
What should the consultant do to resolve the issue?
A. Use the Phoenix ISO
B. Restart the Genesis service on the cluster.
C. Destroy the cluster.
D. Reset the IPMI IP addresses.
正解：C

質問 4：
A consultant is planning a new cluster installation and needs to locate the Shared IPMI port for each of the specific nodes that the customer has bought.
Which Support Portal location contains the document that would identify the port?
A. Hardware Replacement Documentation
B. Software Documentation
C. Knowledge Base
D. Solutions Documentation
正解：A

質問 5：
A consultant is using the Foundation applet to create a cluster. During the process the consultant refreshes the progress bar web page and is concerned when nothing loads.
What should the consultant do to verify that Foundation has completed successfully?
A. Return to the Foundation configuration page and start over.
B. Restart the Foundation process.
C. Connect to any CVM IP address from a web browser.
D. Update Java on the Foundation VM.
正解：C

質問 6：
A consultant configures a Nutanix cluster and integrates the hosts into vCenter using VMware best practices. The customer has requested that the Nutanix cluster only have a single datastore.
Upon configuring the cluster per the customer requirements, vCenter displays an alert regarding the heartbeat datastore. The consultant adds the das.ignoreInsufficientHbDatastore value = true rule. The container can be seen from each host, but the alert remains active.
What should the consultant do to resolve this issue?
A. Make sure the DRS setting is turned on.
B. Turn off and then turn back on HA.
C. Create a second container.
D. Whitelist the vCenter IP address within Prism.
正解：B

質問 7：
A consultant runs the Foundation Applet and discovers all the nodes. The consultant wants to use the latest version of Foundation for imaging for support purposes and to cover the latest hardware and software hypervisor support.
What should the consultant do to upgrade Foundation on a node?
A. Use latest version of Foundation to reimage all the nodes.
B. Use the Foundation VM to upgrade Foundation on all nodes.
C. Use the Foundation Applet to upgrade Foundation on a single node.
D. Use crash cart and manually upgrade Foundation files on one node.
正解：C

質問 8：
A consultant is using a customer's switch for installation. Although the 10GbE ports for each of the hosts are connected to the switch, the nodes fail to be discovered.
What is causing the issue?
A. Foundation VM is running on a Windows host.
B. IPv6 is not enabled on the switch.
C. 10GbE ports are configured with the incorrect duplex setting.
D. IPMI port is not plugged in.
正解：B

安全的な支払方式を利用しています

Credit Cardは今まで全世界の一番安全の支払方式です。少数の手続きの費用かかる必要がありますとはいえ、保障があります。お客様の利益を保障するために、弊社のNCSC-Level-1問題集は全部Credit Cardで支払われることができます。

領収書について：社名入りの領収書が必要な場合、メールで社名に記入していただき送信してください。弊社はPDF版の領収書を提供いたします。

一年間の無料更新サービスを提供します

君が弊社のNutanix NCSC-Level-1をご購入になってから、我々の承諾する一年間の更新サービスが無料で得られています。弊社の専門家たちは毎日更新状態を検査していますから、この一年間、更新されたら、弊社は更新されたNutanix NCSC-Level-1をお客様のメールアドレスにお送りいたします。だから、お客様はいつもタイムリーに更新の通知を受けることができます。我々は購入した一年間でお客様がずっと最新版のNutanix NCSC-Level-1を持っていることを保証します。

弊社のNutanix NCSC-Level-1を利用すれば試験に合格できます

弊社のNutanix NCSC-Level-1は専門家たちが長年の経験を通して最新のシラバスに従って研究し出した勉強資料です。弊社はNCSC-Level-1問題集の質問と答えが間違いないのを保証いたします。

この問題集は過去のデータから分析して作成されて、カバー率が高くて、受験者としてのあなたを助けて時間とお金を節約して試験に合格する通過率を高めます。我々の問題集は的中率が高くて、100％の合格率を保証します。我々の高質量のNutanix NCSC-Level-1を利用すれば、君は一回で試験に合格できます。

TopExamは君にNCSC-Level-1の問題集を提供して、あなたの試験への復習にヘルプを提供して、君に難しい専門知識を楽に勉強させます。TopExamは君の試験への合格を期待しています。

弊社は失敗したら全額で返金することを承諾します

我々は弊社のNCSC-Level-1問題集に自信を持っていますから、試験に失敗したら返金する承諾をします。我々のNutanix NCSC-Level-1を利用して君は試験に合格できると信じています。もし試験に失敗したら、我々は君の支払ったお金を君に全額で返して、君の試験の失敗する経済損失を減少します。

弊社は無料Nutanix NCSC-Level-1サンプルを提供します

お客様は問題集を購入する時、問題集の質量を心配するかもしれませんが、我々はこのことを解決するために、お客様に無料NCSC-Level-1サンプルを提供いたします。そうすると、お客様は購入する前にサンプルをダウンロードしてやってみることができます。君はこのNCSC-Level-1問題集は自分に適するかどうか判断して購入を決めることができます。

NCSC-Level-1試験ツール：あなたの訓練に便利をもたらすために、あなたは自分のペースによって複数のパソコンで設置できます。

Nutanix Certified Services Consultant (NCSC): Level 1 認定 NCSC-Level-1 試験問題:

1. A consultant is deploying a Nutanix cluster at a customer location. The consultant will be deploying the latest AOS along with the latest Nutanix hardware.
Which three references should the consultant review prior to this installation? (Choose three.)

A) Field & Security Advisories
B) Release Notes
C) End-Of-Life (EOL) Information
D) Software Product Interoperability
E) Acropolis Advanced Administration Guide

2. A customer wants to use NIC teaming on an ESXi host using a vSphere Standard Switch configured with the Route based on physical NIC load load balancing option. The customer does not see the option when editing the Teaming and Failover settings for the switch.
How should the consultant resolve this issue?

A) Change the load balancing option on the switch.
B) Install a vCenter server to manage the switch
C) Add a vSphere Distributed Switch
D) Add another physical NIC to the team.

3. During the Foundation imaging process, nodes are successfully imaged, but the cluster creation fails.
Which log should the consultant review to determine the cause?

A) service.log
B) foundation.out
C) first_boot.log
D) genesis.out

4. For a new AHV cluster installation, a customer has 20 NX-8155-G6 nodes with quad port SFP NICs.
The customer wants to meet the following guidelines:
* Take advantage of all available 10GbE links
* Achieve maximum throughput per VM
* Use of redundant ToR switches
* Fastest reconvergence during link failure
How should the load balancing be configured on the host?

A) ovs-vsctl set port br0-up bond_mode=balance-slb
ovs-vsctl set port br0-up other_config:bond-rebalance-interval=30000
ovs-vsctl set port br0 tag=10
B) ovs-vsctl set port br0-up bond_mode=balance-slb
C) ovs-vsctl set port br0-up other_config:lacp-fallback-ab=true
ovs-vsctl set port br0-up lacp=active
ovs-vsctl set port br0-up bond_mode=balance-tcp
D) ovs-vsctl set port br0-up bond_mode=active-backup
ovs-vsctl set port br0-up other_config:bond-rebalance-interval=30000

5. A consultant creates three storage containers (container-1, container-2, container-3). The customer requires that only container-1, which will be utilized as an NFS datastore, be presented to external hosts.
However, users are able to mount all three containers.
What is causing this problem?

A) Deduplication was turned on for all containers.
B) A Container-level whitelist entry was configured.
C) Compression was turned on for all containers.
D) A Global whitelist entry was configured.

質問と回答：

質問 # 1
正解： A、B、D

質問 # 2
正解： C

質問 # 3
正解： A

質問 # 4
正解： A

質問 # 5
正解： D