質問 1:A developer is creating an OmniScript that Provisions trial orgs to their customers. The following text block in the OmniScript uses a merge code to display the ID for the new trial org:
Welcome to Salesforce
Your ID is %Details: Customer10:ID%
During testing, the developer notices that the ID does not display. The data JSON is structured as shown below.
How should the developer correct the merge code in order for the ID to display?
A. To %%Details:Customer|1:ID%
B. To %%Details:Customer|n:ID%
C. To $Details:Customer|0:ID$
D. To %%Details:Customer|0:ID%%
正解:A
質問 2:A developer needs to retrieve data from an external system that stores policy dat a. The external system supports REST APIs to access and update the policies. Due to the volume of the policy data and peak hours of business, calls to the REST APIs sometimes take longer than expected to respond.
The developer creates an Integration Procedure to retrieve the policy data for use in an OmniScript.
Given the external system's known performance issues, which two configurations should be used to implement the call to the external system?
Choose 2 answers
A. Check the Chainable checkbox on the Integration Procedure Action in the OmniScript
B. Check the Chain On Step checkbox on the HTTP Action in the Integration Procedure
C. Configure a Remote action with timeout settings of 120000
D. Set the Timeout property on the HTTP Action in the Integration Procedure
正解:C,D
質問 3:The OmniScript must retrieve device details stored in the Asset object and then call an external system to send troubleshooting commands via REST API to the device.
Which two OmniScript element should the developer use to configure this functionality?
A. REST API Action
B. Navigation Action
C. SOQL Action
D. HTTP Action
E. DataRaptor Extract Action
正解:D,E
質問 4:A customer sets up two LWC OmniScripts, one embedded into another. AccountId is set in a Set Values element in the parent OmniScript. The Accountid set in the parent OmniScript is used to set another Set values element ContextAccountId in the emvedded OmniScript. The embedded OmniScript is activated.
While previewing the OmniScript flow from the parent, it is found that Account I set correct in the parent OmniScript. However ContextAccount in the embedded OmniScript is not set with the Accountid from parent OmniScript. On previewing the embedded OmniScript individually. It is found that ContextAccountId is set correctly.
What is the reason for this? Refer to the exhibit below.
A. The flag passData.JSON in the parent OmniScript in not configured correctly.
B. A developer failed to include a Navigate Action Element to pass data from the parent OmniScript.
C. Both parent and embedded OmniScripts have the same element name for the Set Values element.
D. The WLC PubSub Messge flag in the Set Values action of the parent OmniScript has not been set.
正解:D
質問 5:A developer has a requirement to create a child FlexCard that contains all of its parent FlexCard's records In a Datable How should the developer configure the parent FlexCard's Node?
A. {Recorded}
B. {Records{0}}
C. {Records}
D. {Params, records}
正解:C
質問 6:A developer creates a Flexcard that displays a contact's mailing address and passes the contact's postal code to a child FlexCard.
When configuration text elements in the child FlexCard, what syntax should a developer use to refer to the contact's postal code?
A. {Parent.postalcode}
B. {Records.postalcode}
C. {Params.postalcode}
D. {Postalcode}
正解:A
質問 7:A developer creates an OmniScript to update billing information. After analyzing the different types of customer interactions that occur at the company, the developer determines updating billing information should be included in the majority of customer interactions, which are represented by more than 20 different FlexCards.
What is the most efficient way for the developer to configure the action that invokes the OmniScript?
A. As a Lightning Action
B. As a Custom Action
C. As an OS Action
D. As an OmniStudio Action
正解:C
質問 8:A developer builds a new OmniScript. It contains a Set Values element with a ContextId key/value pair that was used during testing.
What should the developer do before moving the OmniScript to a production org?
A. Delete or Deactivate the Set Values element.
B. Deactivate the contextId key/value pair
C. Add a Show/Hide condition on the Set Values element.
D. Update the ContextId value to specify an id from the Production org.
正解:A
弊社は無料Salesforce OMS-435サンプルを提供します
お客様は問題集を購入する時、問題集の質量を心配するかもしれませんが、我々はこのことを解決するために、お客様に無料OMS-435サンプルを提供いたします。そうすると、お客様は購入する前にサンプルをダウンロードしてやってみることができます。君はこのOMS-435問題集は自分に適するかどうか判断して購入を決めることができます。
OMS-435試験ツール:あなたの訓練に便利をもたらすために、あなたは自分のペースによって複数のパソコンで設置できます。
TopExamは君にOMS-435の問題集を提供して、あなたの試験への復習にヘルプを提供して、君に難しい専門知識を楽に勉強させます。TopExamは君の試験への合格を期待しています。
弊社は失敗したら全額で返金することを承諾します
我々は弊社のOMS-435問題集に自信を持っていますから、試験に失敗したら返金する承諾をします。我々のSalesforce OMS-435を利用して君は試験に合格できると信じています。もし試験に失敗したら、我々は君の支払ったお金を君に全額で返して、君の試験の失敗する経済損失を減少します。
安全的な支払方式を利用しています
Credit Cardは今まで全世界の一番安全の支払方式です。少数の手続きの費用かかる必要がありますとはいえ、保障があります。お客様の利益を保障するために、弊社のOMS-435問題集は全部Credit Cardで支払われることができます。
領収書について:社名入りの領収書が必要な場合、メールで社名に記入していただき送信してください。弊社はPDF版の領収書を提供いたします。
弊社のSalesforce OMS-435を利用すれば試験に合格できます
弊社のSalesforce OMS-435は専門家たちが長年の経験を通して最新のシラバスに従って研究し出した勉強資料です。弊社はOMS-435問題集の質問と答えが間違いないのを保証いたします。
この問題集は過去のデータから分析して作成されて、カバー率が高くて、受験者としてのあなたを助けて時間とお金を節約して試験に合格する通過率を高めます。我々の問題集は的中率が高くて、100%の合格率を保証します。我々の高質量のSalesforce OMS-435を利用すれば、君は一回で試験に合格できます。
Salesforce OMS-435 認定試験の出題範囲:
トピック | 出題範囲 |
---|
トピック 1 | - Test and Troubleshoot Components in the OmniStudio Interaction Console
- Configure FlexCard Flyouts to Display Additional Data
|
トピック 2 | - Build Integration Procedures and DataRaptors for OmniScripts and FlexCards
- Assign Data Sources to FlexCards, Including External Data Sources
|
トピック 3 | - Use a DataRaptor to Transform FlexCard Data JSONs
- Design and Build Parent and Child FlexCards
|
トピック 4 | - Connect an Interaction Launcher to a Console Toolbar
- FlexCards and Omnistudio Interaction Consoles
|
トピック 5 | - Configure Fields to Display Data and Configure Actions to Launch OmniScripts from FlexCards
- Configure OmniScript Elements such as Type Ahead Blocks
|
トピック 6 | - Integration Procedures and OmniStudio Data Tools
- Explore OmniStudio Tools and Resources
|
トピック 7 | - Learn How OmniStudio uses Salesforce sObjects and Fields
- Design and Build Simple and Complex OmniScripts
|
トピック 8 | - Learn How Data Flows Between OmniScripts and Integration Procedures
- Configure Conditions to Display Different Flexcard States
|
トピック 9 | - Build Calculation Matrices and Procedures
- Build an OmniStudio Interaction Console
|
参照:https://trailheadacademy.salesforce.com/classes/oms435-build-guided-experiences-with-omnistudio#
一年間の無料更新サービスを提供します
君が弊社のSalesforce OMS-435をご購入になってから、我々の承諾する一年間の更新サービスが無料で得られています。弊社の専門家たちは毎日更新状態を検査していますから、この一年間、更新されたら、弊社は更新されたSalesforce OMS-435をお客様のメールアドレスにお送りいたします。だから、お客様はいつもタイムリーに更新の通知を受けることができます。我々は購入した一年間でお客様がずっと最新版のSalesforce OMS-435を持っていることを保証します。