Autodesk RVT_ELEC_01101 問題集

試験コード：RVT_ELEC_01101

試験名称：Autodesk Certified Professional in Revit for Electrical Design

最近更新時間：2026-08-11

問題と解答：全65問

RVT_ELEC_01101 無料でデモをダウンロード：

PDF版 Demo ソフト版 Demo オンライン版 Demo

無料問題集RVT_ELEC_01101 資格取得

質問 1：
Refer to exhibit.

In this linked architectural model, demolished walls are missing The electrical designer teams from the architect that the walls have been placed in a phase that does not exist in the host model.
Which steps should the designer lake to associate the architectural phases to their phases?
A. Select Phases > Graphic Overrides
B. Open Visibility Graphics > Revit Links > Display Settings
C. Select the link > Edit Type > Phase Mapping
D. Open Manage Links > Manage Phases
正解：C
解説: (Topexam メンバーにのみ表示されます)

質問 2：
Refer to exhibit.
(The image is presented in Imperial units: 1 In = 25 mm [Metric units rounded].)

An electrical designer is trying to add the selected three-way switch to the existing switch system "b". The designer is unable to add the switch to the switch system.
Why is this problem occurring?
A. A switch system can contain only one switch.
B. Revit is not in Edit Switch System mode.
C. The switch's Switch ID parameter does not match the switch system.
D. The switch is not powered.
正解：C
解説: (Topexam メンバーにのみ表示されます)

質問 3：
Refer to exhibit.

A. Select the callout and change its type from the Type Selector.
B. Delete the existing callout and create a new one with the correct type.
C. Open the callout view from the Project Browser and change its type.
D. Select the callout and choose a detail view under Reference Other View.
正解：D
解説: (Topexam メンバーにのみ表示されます)

質問 4：
Which condition applies when placing a colling-hosted light fixture?
A. The light must be hosted to the celling reference plane.
B. The light must be placed in the same model as the ceiling
C. The light must be defined in the ceiling layout pattern.
D. The light must be snapped to the celling using nodes.
正解：B
解説: (Topexam メンバーにのみ表示されます)

質問 5：
Refer to exhibit.

An electrical designer expects the total connected load on the switchboard to be 4000VA. but Revit Indicates a total connected load of 3606VA. What Is the cause of the discrepancy?
A. The connected loads are set to a different voltage than the switchboard.
B. The Motor demand factor is configured to adjust the connected load.
C. Load is connected through the switchboard's feed through lugs.
D. Sum true load and reactive load is selected in Electrical Settings.
正解：B
解説: (Topexam メンバーにのみ表示されます)

質問 6：
What two ways can an electrical designer copy a cable tray type from a project to a template? (Select two.)
A. 1. Open both the project and the template in the same Revit session.
2. In the project, copy the cable tray to the clipboard.
3. Switch to the template and paste the cable tray in a view.
B. 1. Open both the project and the template in the same Revit session.
2. In the project, select the cable tray and click Edit Family.
3. Click Load into Project and select the template to load the family into.
C. 1. Open the project and the template In separate Revit sessions.
2. In the project, copy the cable tray to the clipboard.
3. Switch to the template and paste the cable tray in a view.
D. 1 Open both the project and the template in the same Revit session.
2. In the template, activate Transfer Project Standards.
3. Choose to copy from the project and then select Cable Tray Types.
E. 1. Open the project and the template in separate Revit sessions.
2. In the template, activate Transfer Project Standards.
3. Choose to copy from the project and then select Cable Tray Types.
正解：A,D
解説: (Topexam メンバーにのみ表示されます)

質問 7：
Refer to exhibit.

An electrical designer is issuing several sheets and wants 'Issued for Bid" to appear in the revision schedule of the title block. Drag and drop into the correct order to indicate how this can be accomplished to only the sheets that are being issued.

正解：

弊社は失敗したら全額で返金することを承諾します

我々は弊社のRVT_ELEC_01101問題集に自信を持っていますから、試験に失敗したら返金する承諾をします。我々のAutodesk RVT_ELEC_01101を利用して君は試験に合格できると信じています。もし試験に失敗したら、我々は君の支払ったお金を君に全額で返して、君の試験の失敗する経済損失を減少します。

弊社は無料Autodesk RVT_ELEC_01101サンプルを提供します

お客様は問題集を購入する時、問題集の質量を心配するかもしれませんが、我々はこのことを解決するために、お客様に無料RVT_ELEC_01101サンプルを提供いたします。そうすると、お客様は購入する前にサンプルをダウンロードしてやってみることができます。君はこのRVT_ELEC_01101問題集は自分に適するかどうか判断して購入を決めることができます。

RVT_ELEC_01101試験ツール：あなたの訓練に便利をもたらすために、あなたは自分のペースによって複数のパソコンで設置できます。

Autodesk RVT_ELEC_01101 認定試験の出題範囲：

トピック	出題範囲
トピック 1	Analysis: This section of the exam measures the skills of Electrical Engineers and focuses on performing analytical tasks in Revit. It includes conducting load calculations, conceptual lighting analysis, and configuring electrical settings for load classifications and demand factors. Candidates must show the ability to use Revit’s analysis tools to ensure proper electrical design performance and energy efficiency.
トピック 2	Documentation: This section of the exam measures the skills of Revit Technicians and covers manipulating views, templates, and schedules to produce accurate documentation. It includes managing panel schedules, creating various view types such as legends, callouts, and 3D views, and applying phasing and revision management. Candidates are also tested on annotation tools, including tags, keynotes, and note blocks, to ensure clarity and consistency in project documentation.
トピック 3	Modeling: This section of the exam measures the skills of Electrical Designers and covers creating and managing electrical elements within Revit. It includes adding electrical equipment such as panelboards and transformers, configuring circuits and low-voltage systems, and using the System Browser for navigation. Candidates must also demonstrate the ability to model connecting geometry, including conduits, cable trays, and wiring, with appropriate settings and fittings.
トピック 4	Collaboration: This section of the exam measures the skills of Project Coordinators and covers collaboration workflows in Revit. It includes working with imported and linked files, managing worksharing concepts, and using interference checks. Candidates are also evaluated on data coordination through copy monitor tools, exporting to different formats, managing design options, and transferring project standards to ensure effective teamwork in shared environments.
トピック 5	Families: This section of the exam measures the skills of BIM Modelers and focuses on creating and editing Revit families. It includes defining MEP connectors, understanding system and component family types, configuring family categories, and setting up light sources. The section also assesses parameter creation, annotation family setup, and controlling element visibility to ensure effective customization and reuse across electrical projects.

参照：https://www.autodesk.com/certification/all-certifications/revit-electrical-design-professional

TopExamは君にRVT_ELEC_01101の問題集を提供して、あなたの試験への復習にヘルプを提供して、君に難しい専門知識を楽に勉強させます。TopExamは君の試験への合格を期待しています。

安全的な支払方式を利用しています

Credit Cardは今まで全世界の一番安全の支払方式です。少数の手続きの費用かかる必要がありますとはいえ、保障があります。お客様の利益を保障するために、弊社のRVT_ELEC_01101問題集は全部Credit Cardで支払われることができます。

領収書について：社名入りの領収書が必要な場合、メールで社名に記入していただき送信してください。弊社はPDF版の領収書を提供いたします。

一年間の無料更新サービスを提供します

君が弊社のAutodesk RVT_ELEC_01101をご購入になってから、我々の承諾する一年間の更新サービスが無料で得られています。弊社の専門家たちは毎日更新状態を検査していますから、この一年間、更新されたら、弊社は更新されたAutodesk RVT_ELEC_01101をお客様のメールアドレスにお送りいたします。だから、お客様はいつもタイムリーに更新の通知を受けることができます。我々は購入した一年間でお客様がずっと最新版のAutodesk RVT_ELEC_01101を持っていることを保証します。

弊社のAutodesk RVT_ELEC_01101を利用すれば試験に合格できます

弊社のAutodesk RVT_ELEC_01101は専門家たちが長年の経験を通して最新のシラバスに従って研究し出した勉強資料です。弊社はRVT_ELEC_01101問題集の質問と答えが間違いないのを保証いたします。

この問題集は過去のデータから分析して作成されて、カバー率が高くて、受験者としてのあなたを助けて時間とお金を節約して試験に合格する通過率を高めます。我々の問題集は的中率が高くて、100％の合格率を保証します。我々の高質量のAutodesk RVT_ELEC_01101を利用すれば、君は一回で試験に合格できます。