VCE 210-030 問題集

質問 1：
When deploying a Vblock System 340, you allocate a 130 GB storage pool for boot LUNs.
According to VCE best practices, what is the maximum number of hosts that you are able to configure
with this pool?
A. 2
B. 8
C. 4
D. 6
正解：D

質問 2：
A NAS file system has been created using UIM/P.
Which setting must be set manually?
A. Enable the STATD daemon on the Control Station.
B. Edit the VDM STATD hostname file.
C. Enable uncache write.
D. Enable SMI-S.
正解：C

質問 3：
During a deployment of a Vblock System 340, one of the control stations has failed to boot up. You have
performed the necessary troubleshooting steps; however, the problem still persists.
What are the next two steps? (Choose two.)
A. Reinstall the file VNX OE on the failed Control Station.
B. Open a case with VCE support.
C. Collect the necessary logs from the primary Control Station.
D. Collect the necessary logs from the primary Data Mover.
正解：B,C

質問 4：
When planning a power shutdown on the VNX5300 Unified storage array, how would you verify the
successful power down of each DME?
A. On the front of a DME, the amber fault LED is not lit on the latch handle of each DME management
module.
B. On the rear of a DME, the amber fault LED is lit on the latch handle of each DME management module.
C. On the rear of a DME, the green fault LED is lit on the latch handle of each DME management module.
D. On the front of a DME, the enclosure amber fault LED is not lit and the enclosure power LED is lit.
正解：B

質問 5：
Your customer would like to have Windows file shares set up on the VBlock System 720, with a VNX
Gateway attached.
Which GUI tool would you use to set this up?
A. Prosphere
B. VCE Vision
C. SMC
D. Unisphere
正解：D

質問 6：
What is the microcode used to manage and control a VNX storage array in a Vblock System 340?
A. DART
B. CLARiiON
C. Flare
D. Enginuity
正解：B

質問 7：
A customer purchased a Vblock System 720 and wants to implement a Fast VP policy. The customer has
different drive types and wants to know the VCE standards for tiering.
According to the VCE Logical Build Guide, what is the correct naming standard for the tier?
A. RAID6(6+2)
B. Prod_GP_01
C. Archive Tier
D. Virtual Pool
正解：B

質問 8：
In a Vblock System 340, you set up a new storage pool for high performance production virtual machines.
However, you immediately experience a performance problem with these new virtual machines.
What is affecting your performance?
A. The datastore is situated on local storage.
B. The datastore is situated on an EFD storage pool.
C. The virtual machines are thick provisioned.
D. The datastore is situated on an NL-SAS storage pool.
正解：D

質問 9：
Click the Exhibit button.

Referring to the exhibit, where are the 8 GB FC I/O module components?
A. 8
B. 4
C. 7
D. 5
正解：D