7003-1の無料問題集（65題）、7003-1認定試験参考書

Avaya 7003-1 問題集

試験コード：7003-1

試験名称：Avaya Communication Server 1000 for Avaya Aura Implementation Exam

最近更新時間：2024-04-23

問題と解答：全65問

7003-1 無料でデモをダウンロード：

PDF版 Demo ソフト版 Demo オンライン版 Demo

無料問題集7003-1 資格取得

質問 1：
Click the exhibit button.

A technician is provisioning a new Communication Server (CS) 1000 Rls. 7x system for a customer, and is adding an SIP virtual route using Element Manager Routes and Trunnks.
What is the Trunk Type (TKTP)?
A. Automatic (TIE AUTO)
B. Integrated Service Access route (ISA)
C. Direct inward Dialing trunk (DID)
D. TIE Trunk data block (TIE)
正解：D

質問 2：
A customer with an existing Communication (CS) 1000E 6.0 system is upgrading to a CS 1000E Rls. 7x HA system. As a part of this upgrade, the CPPM Signaling Servers are being decommissioned and replaced with CPDC signaling servers.
Which two methods can be used to restore the original IP Telephony node configuration to the CS 1000E Rls. 7x HA system? (Choose two)
A. Import the original IP Telephone Node File the NRS database backup file
B. Import the original IP Telephone Node File from the upgraded Call Server database.
C. Import the original IP Telephone Node File using an XML from the CPPM Signaling Server.
D. Import the original IP Telephone Node File from the upgraded Call Servers database.
正解：A,B

質問 3：
A technician is upgrading an option 11C Rls. 5x to a communication server 1000E SA Rls. 7x based on a CPPM CS, COTS SS with 4 chassis media gateway (MG), 100IP sets, 124 digital sets, 30 analog sets and one PR12 DID connection for the incoming and outgoing calls cannot be made from all type of the sets except for the sets in MG3.
When the technician is finished with the upgrade it is noticed during the acceptance testing that outgoing calls cannot be made from all type of the sets except for the sets in mG3. All the sets have dial tone.
Which statement describes what is causing this issue?
A. The COTS Signaling Server is faulty
B. All MGs are unregistered except MG3
C. The DB 128 is not installed in MG3
D. The PR 12 loop disabled in MG3
正解：B

質問 4：
A customer that has an existing option 11C chassis system with an SCC card is planning t o upgrade to a Communication Server (Rls.) 1000E Rls. 7x system. A CPMG Co-Resident server card will be installed.
Which action must be completed manually?
A. The digital Trunk Numbers must be reprogrammed with a new format
B. The tone Receiver Terminal Numbers must be re-Programmed with new format
C. The IP Phones Terminal Numbers must be entered with a new format
D. The IP address for each Ip media Gateway must be entered in LD 97
正解：D

質問 5：
A field calls about a problem enabling the DSPs on a new Communication Server (CS) 1000E SA Co-resident on release 7x. The DSPs on the MG 1 are all enabled but enabling the DSPs on MG2 and MG3 fail, and asked that the configuration be reviewed.
MG1: CPMG 128
MG2: MGC 128 DSP DB in position 2
MG3: MGC 128 DSP DB in position 2
After reviewing the configuration, an error in the DSP 128 VGW (DSP) configuration is identified?
Which configuration option accurately reflects the proper configuration for the voice Gateway (DSP) channel?
A. Numbering of VGW channels: 128 Trunk data block VGW Terminal number: 004 0 01 0 Designator field for trunk: DSP Extended trunk DSP DB 128 Customer number: 00
B. Numbering of VGW channels: 128 Trunk data block VGW Terminal number: 004 0 02 0 Designator field for trunk: DSP Extended trunk DSP DB 128 Customer number: 00
C. Numbering of VGW channels: 128 Trunk data block VGW Terminal number: 004 0 00 0 Designator field for trunk: DSP Extended trunk DSP DB 128 Customer number: 00
D. Numbering of VGW channels: 128 Trunk data block VGW Terminal number: 004 0 11 0 Designator field for trunk: DSP Extended trunk DSP DB 128 Customer number: 00
正解：D

質問 6：
A customer has successfully installed a Common Processor Media Gateway (CPMG) in a Communication Server (CS) 1000E system. The MGC has registered with the Call Server.
What is displayed on the CPMG LED display to confirm successful registration?
A. The MGC display will read "PASS"
B. The MGC display will show Superloop and shelf number of MG 1000E
C. The MGC display will read "LOAD"
D. The MGC display will read "Exxx" (E000)
正解：B

一年間の無料更新サービスを提供します

君が弊社のAvaya 7003-1をご購入になってから、我々の承諾する一年間の更新サービスが無料で得られています。弊社の専門家たちは毎日更新状態を検査していますから、この一年間、更新されたら、弊社は更新されたAvaya 7003-1をお客様のメールアドレスにお送りいたします。だから、お客様はいつもタイムリーに更新の通知を受けることができます。我々は購入した一年間でお客様がずっと最新版のAvaya 7003-1を持っていることを保証します。

弊社は失敗したら全額で返金することを承諾します

我々は弊社の7003-1問題集に自信を持っていますから、試験に失敗したら返金する承諾をします。我々のAvaya 7003-1を利用して君は試験に合格できると信じています。もし試験に失敗したら、我々は君の支払ったお金を君に全額で返して、君の試験の失敗する経済損失を減少します。

TopExamは君に7003-1の問題集を提供して、あなたの試験への復習にヘルプを提供して、君に難しい専門知識を楽に勉強させます。TopExamは君の試験への合格を期待しています。

弊社のAvaya 7003-1を利用すれば試験に合格できます

弊社のAvaya 7003-1は専門家たちが長年の経験を通して最新のシラバスに従って研究し出した勉強資料です。弊社は7003-1問題集の質問と答えが間違いないのを保証いたします。

この問題集は過去のデータから分析して作成されて、カバー率が高くて、受験者としてのあなたを助けて時間とお金を節約して試験に合格する通過率を高めます。我々の問題集は的中率が高くて、100％の合格率を保証します。我々の高質量のAvaya 7003-1を利用すれば、君は一回で試験に合格できます。

安全的な支払方式を利用しています

Credit Cardは今まで全世界の一番安全の支払方式です。少数の手続きの費用かかる必要がありますとはいえ、保障があります。お客様の利益を保障するために、弊社の7003-1問題集は全部Credit Cardで支払われることができます。

領収書について：社名入りの領収書が必要な場合、メールで社名に記入していただき送信してください。弊社はPDF版の領収書を提供いたします。

弊社は無料Avaya 7003-1サンプルを提供します

お客様は問題集を購入する時、問題集の質量を心配するかもしれませんが、我々はこのことを解決するために、お客様に無料7003-1サンプルを提供いたします。そうすると、お客様は購入する前にサンプルをダウンロードしてやってみることができます。君はこの7003-1問題集は自分に適するかどうか判断して購入を決めることができます。

7003-1試験ツール：あなたの訓練に便利をもたらすために、あなたは自分のペースによって複数のパソコンで設置できます。

Avaya Communication Server 1000 for Avaya Aura Implementation 認定 7003-1 試験問題:

1. A technician has just installed and configured a System Manager as the primary security Server and configured a Member Security Server with the Element Manager and Subscriber Manager Applications deployed. The Communication Server (CS) 1000E Rls. 7x Call Server is part of this server security domain. All connections are up and running. When the new CS 1000 Rls. 7x system link on the elements window is clicked, the web browser returns with the following message.
"Destination IP address cannot be reached"
What is causing the problem?

A) The wrong Call Server IP address was entered during the application deployment.
B) The browser window has not been refreshed.
C) The Element Manager is unable to reach the MC32S via the ELAN.
D) The Public Key Certificates for Web SSL were not added in the Call Server.

2. Refer to the exhibit.

Avaya 7003-1 Exam
A Communication Server 1000E Rls. 7 x customer is adding a new Human Resources department with eight IP telephone users. The customer has asked for the telephones to be programmed with consecutive Directory numbers (DNs) from their DID range (2000-2099).
Which numbers sequence is available to meet the customer's requirements?

A) 2010-2017
B) 2050-5057
C) 2001-2008
D) 5091-2098

3. A customer with an existing Option 11C Rls. 5.5 chassis system plans to upgrade to a Communication Server (CS) 1000E Rls. 7x Standard Availability with a single IP Media Gateway (MG) 1000E chassis.
To complete the upgrade, which component in the Option 11C must be replaced?

A) Digital Line Card
B) Call Processor
C) Media Gateway
D) SSC Card

4. A customer with a Communication Server (CS) 1000E at Rls. 5.5 with two IPMG is upgrading the system to CS 1000E SA release 7 x. The second media gateway includes a media Gateway Controller card with one high density DSP daughter board.
How many voice channels does this configuration provide?

A) 32
B) 96
C) 128
D) 64

5. Click the Exhibit button.

A technician is performing an upgrade of existing Communication Server 1000E Rls. 6.0 servers from the Deployment Servers. The system is pre-configured and the status is un-deployed. The
server has been selected, but the Deployment Actions pull-down list does not include the choice to deploy.
Which two corrective actions must be taken to continue with deployment? (Choose two)